PUSHROD E-CAM POWER UP KIT
This part is no longer available.
M-9000-E303
Instruction Sheet
Not Available
WARNING:
This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Save on one of the most famous Ford Racing “Alpha” Cams and hydraulic roller lifter kits for your small block Ford. Check with your Ford Racing Performance Parts dealer for special savings through May 31, 2014.
The legendary E303 cam developed by Ford Racing for the 5.0L Fox-body Mustang. This cam provides a noticeable power improvement and lumpy idle while maintaining good driveability with a manual transmission. Works well with carburetors or mass air fuel injection. Kit includes M-6500-R302 Hydraulic Roller LIfters
- Fits 1985 and later 302 roller cam blocks
- Will also fit 1994 –1997 351W blocks with factory roller cam
- Requires upgraded valve springs. For stock cylinder head applications use M-6513-A50 valve springs installed at 1.820". For aftermarket cylinder heads M-6513-BH recommended.
- Valve spring requirements: 120 lbs valve seat pressure minimum 295 lbs open.
- On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI or speed density EFI systems.
- Also fits 1994-97 351W with factory roller cam when used with mass air EFI.
- Stock 5.0L HO cam advertised specs are 266°/266° duration, 0.444"/0.444" lift.
- Higher stall torque converter recommended for automatic transmission
Part Type
Engine: Cam/Tappets/Pushrods
Warranty Availability
Not Available
Package Dimensions
7.75" x 6.25" x 25.75"
Package Weight
16.7 lb(s)
UPC Code
756122223284
Country of Origin
United States