PRESSURE PLATE

This part is no longer available.
PRESSURE PLATE
M-7563-B302
Instruction Sheet
Not Available
    CLUTCHES
    PART NUMBER DESCRIPTION ENGINE DIAMETER TECHNICAL INFORMATION
    M-7550-X302
    (1)(2)(3)     		Disc SBF V8 10.5" HD disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side.Will work with M-7563-B302 pressure plate.
    M-7550-T302
    (1)3     		Disc SBF V8 10.5" HD disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Designed for 26 spline shaft on M-7003-R58C, and M-7003-R58H transmissions. Will work with M-7563-B302 pressure plate.
    M-7563-B302
    (1)(3)(4)     		Pressure Plate SBF V8 10.5" HD diaphragm type with centrifugal assist. Has approx. 25% more capacity than stock Mustang unit. Cast iron plate.
    M-7560-A302N
    (1)(2)(3)(4)     		HD Clutch Kit SBF V8 10.5" Consists of M-7550-A302N disc, M-7563-A302N pressure plate and throwout bearing.
    M-7560-T46
    (1)     		11" Clutch Kit 4.6L DOHC  11" Kit contains 11" clutch disc with 26 spline hub and pressure plate. Clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Centrifugal assist design pressure plate with 25% more torque capacity then production Cobra. Used when installing M-7003-R58C and M-7003-R58H transmissions into 1996-04 4.6L Mustangs with production 11" flywheel or Ford Performance flywheels M-6375-F46A, M-6375-G46A or M-6375-R00A.
    NOTES: 1 Clutches have NO warranty! 2 All clutch discs have 1.0625"-10 spline hub. 3 Fits all 1986-01 Mustang GT, 1993-98 Cobra with T-5 or T45 Transmissions. 2001-04 Mustang GT with 3650 transmission, 1999-03 Cobra uses an 11" clutch. OK to mix and match Ford Performance clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Installation of 10.5" clutch assemblies on 1979-85 vehicles equipped with 10" clutch requires new flywheel (see page 173). Metric fasteners and dowel pins must be used with 10.5" clutches. 4 Requires metric pressure plate bolts and alignment dowel pins. Ford Racing kit M-6397-A302 (see page 172).
Part Type
Driveline: Clutch Related
Warranty Availability
Not Available
Package Dimensions
15" x 5" x 15"
Package Weight
21.1 lb(s)
UPC Code
756122756324
Country of Origin
United States