BRONCO 2.3L MPC PERFORMANCE CAL VOUCHER ONLY
The “Forty-nine States Street Legal" icon means Ford Motor Company has determined that this part does not have an adverse effect on emissions when installed and used properly in the application(s) identified in the product description and may be installed in vehicles driven on public roads and highways. However, this part does not have regulatory approval for use in California and can not legally be registered or used on vehicles in California. The use of this product in California may subject the user to penalty provisions under California law.
Enhance the performance of the 2.3L EcoBoost engine in your 2025-2026 Bronco. Ford Racing Parts calibrations are engineered and dyno tested to deliver increased power and performance while maintaining reliability. Fits both automatic and manual transmission equipped vehicles.
THIS IS FOR A VOUCHER ONLY!!!!!!!! PRO-CAL 4 TOOL NOT INCLUDED!!!!!!!!!
Peak Power = 333 hp @ 5,000 rpm
Peak Torque = 415 lb-ft @ 3,500 rpm
Improved throttle response throughout rpm range
Premium Fuel Required
Ford Racing Parts 3 year/36k mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician
Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile) [Additional modifications required]
Ability to change axle/FDU ratio up to 5.38
Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
For U.S. & Canadian Vehicles
For non-California vehicles only
* Premium fuel required*
Visit the FRP Performance Calibrations page to see the full lineup.
PRO-CAL 4 TOOL NOT INCLUDED!!! YOU MUST HAVE A PRO CAL 4 MARRIED TO THE VEHICLE YOU INTEND THE CALIBRATION FOR!!!!
***Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur***
***Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions***
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
****THIS PART IS NOT RETURNABLE!!!****
