2021-2023 F-150 3.5L ECOBOOST PERFORMANCE CALIBRATION

2021-2023 F-150 3.5L ECOBOOST PERFORMANCE CALIBRATION
2021-2023 F-150 3.5L ECOBOOST PERFORMANCE CALIBRATION
2021-2023 F-150 3.5L ECOBOOST PERFORMANCE CALIBRATION
2021-2023 F-150 3.5L ECOBOOST PERFORMANCE CALIBRATION
2021-2023 F-150 3.5L ECOBOOST PERFORMANCE CALIBRATION
M-9603-F35
Retail
$825.00
Sold in Units of
Each (1)
Instruction Sheet
Available (PDF)
Sign in to add to wish list
This part has the Fifty State Street Legal icon The “Fifty States Street Legal” icon means that this part has been determined by the California Air Resources Board (CARB) not to have an adverse effect on emissions when installed and used properly in the application(s) identified in the product description. Under EPA and CARB policy, such parts may be installed in vehicles driven on public roads and highways.
Enhance the performance of your 2021-2023 F-150 3.5L EcoBoost engine with the Ford Performance Parts calibration. Ford Performance Parts calibrations are engineered and dyno tested to deliver more power and increased performance while maintaining reliability.
  • Peak power = 450 HP @ 5,250 rpm
  • +55 HP @ 5,250 rpm
  • Peak torque = 510 lb-ft @ 3,500 rpm
  • +100 lb-ft @ 2,500 rpm
  • Improved throttle response throughout the rpm range
  • Optimized Shift Schedule 
  • Premium Fuel Required (91 octane minimum)
  • M-12655-F Pro-Cal 4 delivery tool included 
  • 3yr/36k mile Ford Performance Parts warranty from new vehicle in-service when installed at a Ford dealer or by an ASE/Red Seal certified technician. Please contact the Ford Performance Parts Tech-line for warranty registration.
  • For US & Canada Vehicles Only
  • For 4x2 and 4x4 models - all cab configurations and trim levels
  • 50-state approved. C.A.R.B. EO#: D-431-8
  • ProCal Tool can read and clear DTCs
    • Tire size and gear ratio cannot be adjusted
***DOES NOT FIT 3.5L POWERBOOST HYBRID ENGINES***

***For F-150 Raptor 3.5L engine, please see M-9603-R35

 ***Calibration and ProCal 4 tool are VIN locked. Please contact the Tech Line with additional questions***   

 ***NOTE*** ProCal 4 software only available for Windows 7 or greater.  Will NOT work with Windows 10 in "S Mode".    
Part Type
Electrical: Analyzers / Calibrators
Instruction Sheet
Warranty Availability
Package Dimensions
3.5" x 3.5" x 6"
Package Weight
1.05 lb(s)
UPC Code
756122023297
Country of Origin
United States