2.0L I-4 ECOBOOST CRATE ENGINE KIT

• Engine from 2013-2014 Ford Focus ST
• Production rating of 252 Horsepower @ 5,500 RPM
• Production rating of 270 lb. ft. of torque @ 3,000 RPM
• When used with Engine Control Pack M-6017-20T and 93 octane unleaded fuel, torque is increased 90 lb. ft at 2800 RPM - with a significant increase up to 4200 RPM.  See the power curve for PN M-6017-20T
• All-aluminum construction - about 55 pounds lighter than a comparable naturally aspirated V6 engine
• 9.3:1 compression ratio - Premium fuel recommended
• Ti-VCT Strategy Employs twin independent variable camshaft timing for optimized fuel economy, performance and emissions
• Borg-Warner Turbocharger with low-inertia rotor spins at speeds up to 195,000 rpm, producing up to 16 psi of boost
  • Optimized design ensures that maximum torque is achieved at very low engine revs
  • Peak torque available from 2,000 to 4,500 rpm
• Direct-Injection high-pressure fuel system
  • Seven jets on each injector spray fuel directly into the combustion chamber
• Engine design has been optimized for maximum operating efficiency, with a focus on minimizing friction and other parasitic losses
  • Low-friction coatings on the piston rings and highly polished surfaces on the tappets
• Engine Kit Includes:
• Starter
• Alternator
• Front accessory drive and belt
• Intercooler and air intake ducting
• Air Cleaner Assembly
• Manual Transmission flexplate/flywheel
• M-6017-20T Controls Pack available for custom vehicle builds
• The weight of the engine only is approximately 300 lbs.

Click here for engine exterior dimensions