GEN 2 5.0L 2017 NMRA COYOTE STOCK SEALED RACING ENGINE

This part is no longer available.
GEN 2 5.0L 2017 NMRA COYOTE STOCK SEALED RACING ENGINE
M-6007-M50SA
Instruction Sheet
Not Available
WARNING:
This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
'Sealed' Gen 2, 2017 Coyote crate engine for use by NMRA-Coyote stock racing competitors ONLY*, the Ford Performance all-aluminum 2017 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver 435 horsepower @ 6500 rpm and 400 ft.-lb.+ of torque @ 4250 rpm (with premium fuel). The lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.
  • 435 horsepower 400 ft.-lb.+ of torque  
  • 11.0:1 Compression ratio 
  • Hypereutectic aluminum pistons
  • Forged steel connecting rods 
  • Forged steel crankshaft
  • Aluminum block 
  • 8qt capacity oil pan
  • Tuned composite intake manifold provides efficient air delivery and weight savings
  • 80 mm single bore "drive by wire" throttlebody with variable runner control
  • Aluminum cylinder heads, DOHC, four valves per cylinder, Variable intake and exhaust camshaft timing
  • Mustang GT 409 stainless-steel tubular exhaust manifold on the RIGHT SIDE ONLY
  • Includes manual transmission engine harness and flywheel
  • Vehicle harness and PCM not included
  • Use Ford Performance's NEW wiring, PCM and installation kit M-6017-504V designed for street rod/project car installation.
  • Does not include alternator, for alternator kit see M-8600-M50BALT 
  • Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
  • 5.0L Mustang engine cover kit available, see M-9680-M50A 
  • Photo and specs may vary.
  • Engine weight: 444 lbs.  
  •  M-6007-M50A Coyote Crate Engine Technical Reference Guide Click here for engine exterior dimensions 
  • *Proof of NMRA membership/competition license must be provided. Contact the Ford Performance Parts Tech-line @ 800-367-3788 for more details. 
Part Type
Engine: Complete Engines
Warranty Availability
Not Available
Package Dimensions
36.5" x 44.5" x 36"
Package Weight
545 lb(s)
UPC Code
756122005262
Country of Origin
United States